Boon, the Tiny T. Rex – http://www.3dkitbash.com/boon
Music: http://www.bensound.com
Print Settings
45mm/s Speed
0.2 layer height
2 shells
25% infill
supports off
235c Temperature
95c Bed
Esun abs
print time: 6 hours
Stuff with Kirby
Boon, the Tiny T. Rex – http://www.3dkitbash.com/boon
Music: http://www.bensound.com
Print Settings
45mm/s Speed
0.2 layer height
2 shells
25% infill
supports off
235c Temperature
95c Bed
Esun abs
print time: 6 hours
Nefertiti Lego Minifigure Head: http://www.thingiverse.com/thing:1396008
Music: http://www.bensound.com
Settings Used
Simplify3d
50mm/s Speed
0.10 Layer Height
2 Shells
25% Infill
No Supports
230C Temperature
95C Bed
Hatchbox ABS
Print time ~1:30
Scale 100%
3-8-2016 Update – I wasn’t thinking right when powering this. I was trying to power the board via usb on the computer, thats why there was not enough power. Plug in the barrel jack and it then has enough power for the board and the servo without needing a bec.
For this Stuff With Kirby video I am putting together an InMoov Finger Starter kit that I printed on my Lulzbot 3d printer.
http://inmoov.fr/finger-starter/ – InMoov tutorial
For my first Timelapse Tuesday video I decided to print a Low-Poly Kirby.
Low-Poly Retro Characters: https://www.youmagine.com/designs/low-poly-retro-characters
Music: http://www.bensound.com
Settings Used
Simplify3d
60mm/s Speed
0.20 Layer Height
2 Shells
25% Infill
No Supports
230C Temperature
90C Bed
Esun Hips
Print time ~2:00
Scale 150%
Weight 34g
This is how I made a referigerator magnet using an image found online. I used Adobe Illustrator, Fusion 360, Meshmixer and Silhouette Studio. I then printed the design on my Lulzbot Taz
Here is the Thingiverse link for the SVG file I made – http://www.thingiverse.com/thing:1324388
This tutorial is how to read JSON data on a Raspberry Pi. I am using weathermap.org to get the data.
http://www.instructables.com/id/Reading-JSON-With-Raspberry-Pi/ – Instructables tutorial I made
http://openweathermap.org/api – API used
http://jsonlint.com/ – JSONLint
This is my method for drilling apart Hot Wheels cars and stripping the paint. I use a 1/16″ and 5/32″ drill bit. 2-56 tap and screws to put back together. For stripping the paint I use Rustoleum Aircraft remover from Autozone
In this video I show how to setup a Raspberry Pi to use a Pimoroni Piano Hat and how to map the keys to custom sounds.
https://shop.pimoroni.com/products/pi… – Pimoroni Piano Hat
http://www.pown.it/3746 – Daft Punk soundboard
This is the upgrades I have done to my Lulzbot Taz 4 and the enclosure I built for it.
http://www.thingiverse.com/thing:866604 – X Axis Openbuilds v-slot
http://www.thingiverse.com/thing:949082 – Y Axis Openbuilds v-slot
http://www.thingiverse.com/thing:755184 – Strengthened extruder body
http://www.filastruder.com/products/all-metal-e3d-v6-hotend – E3Dv6 Hot end
https://www.lulzbot.com/store/parts/lulzbot-taz-pei-sheet – Lulzbot PEI Sheet
http://devel.lulzbot.com/TAZ/cat_guard/ – Cat Guard (enclosure)
This tutorial will show you how to use a Raspberry Pi, RTL-SDR, and a program called dump1090 to track airplanes.
https://github.com/MalcolmRobb/dump1090 – Dump1090 Github
http://satsignal.eu/raspberry-pi/dump1090.html – Instructions I used
http://www.amazon.com/dp/B00WZL6WPO/ref=cm_sw_r_tw_dp_6vfMwb1BDSXF4 – 1090MHZ antenna
https://www.adafruit.com/products/1497 – rtl-sdr